7211 BE-2RZP-Angular contact ball bearing-FGFA bearings

7211 BE-2RZP Single row angular contact ball bearing with 40° contact angle and non-contact seals on both sides

Angular contact ball bearings can simultaneously accommodate radial and axial loads. They are capable of operating at high rotational speeds. The greater the contact angle, the higher the axial load capacity. High-precision and high-speed bearings typically employ a 15-degree contact angle. Under axial force, the contact angle increases.

Dimensions

d	55 mm	Bore diameter
D	100 mm	Outside diameter
B	21 mm	Width
d₁	≈72.5 mm	Shoulder diameter of inner ring (large side face)
d₂	≈63.62 mm	Shoulder diameter of inner ring (small side face)
D₂	≈85.02 mm	Recess diameter of outer ring (large side face)
D₅	≈94.25 mm	Recess diameter of outer ring (small side face)
a	43 mm	Distance side face to pressure point
r_1,2	min.1.5 mm	Chamfer dimension
r_3,4	min.1 mm	Chamfer dimension

Abutment dimensions

d_a	min.64 mm	Diameter of shaft abutment
d_a	max.72 mm	Diameter of shaft abutment
D_a	max.91 mm	Abutment diameter housing
D_b	max.94 mm	Diameter of housing abutment
r_a	max.1.5 mm	Radius of fillet
r_b	max.1 mm	Radius of fillet

Calculation data

Basic dynamic load rating	C	46.2 kN
Basic static load rating	C₀	36 kN
Fatigue load limit	P_u	1.53 kN
Reference speed		7 500 r/min
Limiting speed		7 500 r/min
Minimum axial load factor	A	0.022
Minimum radial load factor	k_r	0.095
Limiting value	e	1.14

Single bearing or bearing pair arranged in tandem
Calculation factor (single, tandem)	X	0.35
Calculation factor (single, tandem)	Y₀	0.26
Calculation factor (single, tandem)	Y₂	0.57

Bearing pair arranged back-to-back or face-to-face
Calculation factor (back-to-back, face-to-face)	X	0.57
Calculation factor (back-to-back, face-to-face)	Y₀	0.52
Calculation factor (back-to-back, face-to-face)	Y₁	0.55
Calculation factor (back-to-back, face-to-face)	Y₂	0.93

Tolerances: Normal ( ), P6, P5, Normal (inch)
Internal clearance: CA+CB+CC, G
Preload: GA+GB+GC

Basic Parameters

Bearing Inner Diameter：55 mm
Bearing Outer Diameter：100 mm
Bearing Thickness：21 mm

Wafangdian Fafuge Bearing Co., Ltd., rooted in Wafangdian Bearing Industry Base, is an emerging professional bearing manufacturer. Drawing on the base’s profound industrial heritage, we have upheld craftsmanship since inception, integrated precision manufacturing into R&D and production, and focused on the R&D and refined production of spherical roller bearings.